Single or Double Breasted Jacket
The first and perhaps most noticeable element of a man’s suit is whether the jacket is single or double-breasted. Single-breasted custom made suits jackets have a single row of buttons down the front, with the jacket flaps overlapping enough to permit buttoning. A double-breasted jacket has two rows of buttons, with the front overlapping sufficiently to allow both flaps to be attached to the opposite row of buttons. The choice between a single or double-breasted jacket is a matter of personal taste, though the vast majority of American men choose the single breasted option as that this is what is readily available to them. In addition, a lack of familiarity with the double-breasted suit jacket may account for the single-breasted suit’s dominance. It’s unfortunate, as that the double breasted jacket has a number of advantages for certain men. Thin gentlemen, in particular those who are somewhat taller, can benefit greatly from double-breasted suits as they give a fuller appearance to the figure; on larger men, double-breasted suits can have a tendency to draw attention to the midsection, so careful attention and an expert tailor should be employed. When it comes to formality, all things being equal a double-breasted jacket is more formal as that it is always buttoned, although a man wearing a single breasted jacket can negate this advantage by throwing on a vest. But for the modern man, the single breasted suit is the current standard bearer; a dark, well fitting, concervatively build single-breasted jacket is perfectly acceptable at all but the most formal of occasions.
Jacket Buttons
A suit jacket has either one or two rows of main front buttons. A single-breasted jacket has anywhere from one to four, though two and three button jackets are most common. The three-button jacket is the most traditional configuration, taking its cue from English riding jackets; properly worn, it gives the illusion of height. It’s common practice to button the middle or second buttons when standing, though the top two buttons may be fastened to produce a slightly more formal appearance (A great way to remember this is Sometimes – Always – Never). Two-button suits are a slightly later innovation, and because they show more of the shirt and tie, can have a slimming effect. Only the top button of a two-button jacket is fastened. With the exception of a the one button jacket, the bottom button is never fastened.
Double-breasted jackets most commonly have either four or six buttons on each side – where there are six buttons, only the lower four are for buttoning, though due to the design of the suit, only two will actually be buttoned at any given time. There is also an extra hidden button on the reverse of the outside flap of a double-breasted suit, onto which the inside or “hidden” flap attaches. Contrary to the habits of certain celebrities, a double-breasted jacket should never be left unbuttoned when standing; it is always securely buttoned upon standing and remains buttoned until one is again seated. Additionally, while the bottom button of a single-breasted jacket is always left undone, both of the operable buttons on a double-breasted jacket are fastened. As with the gorge of the lapel, the height of the waist buttons can been altered slightly to accentuate or diminish height, but this must be done carefully.
Lapels
Lapels come in a wide variety of styles, and have been the subject of fashion experiments for decades. It’s hard to look back at the 70’s and not cringe at the sight of lapels extending to the shoulders, and I’m sure years from now we’ll be embarrassed with our current obsession with slim cuts, especially on men who this does not flatter. As is the case with much of classic fashion, the most timeless lapels are of a moderate width and are matched to the proportions of the wearer rather than the winds of fashion. By doing this you can ensure your jacket doesn’t look too big or too small, despite it fitting you perfectly in other areas. The late Carey Grant used to have the notches on his lapels lowered so that he wouldn’t appear tall and lanky. A small, but effective, tailoring technique.
The vast majority of suit lapels fall into two styles: notched (seen to our left), which has a wide V-shaped opening where the lapel and collar join; and peaked (seen to our right), which flares out in a sharp point with a very narrow deep V at the join. Notched and peaked lapels are equally classic, though the latter are most commonly found on double-breasted jackets and somewhat signal a higher level of formality. A peak lapel on a single-breasted jacket is an excellent way to raise its level of formality, but is almost impossible to find on anything but a custom made suit.
Main Jacket Pockets
The most formal are jetted pockets, where the pocket is sewn into the lining of the jacket and only a narrow horizontal opening appears on the side of the jacket. These pockets, being nearly invisible, contribute to a very sleek, polished appearance, and are most frequently found on formal-wear. The next style, the flap pocket, is slightly less formal, though it is perfectly acceptable in all the circumstances where a gentleman is likely to be found in a suit. Flap pockets are made identically to jetted pockets, but include a flap sewn into the top of the pocket, which covers the pocket’s opening. These are the most common pockets on suit jackets, and in the very best, are fabricated so that the wearer may tuck the flaps inside, mimicking the jetted pocket. There are also diagonally-cut flap pockets known as hacking pockets, though they are somewhat less common; the
hacking pocket is derived from English riding gear, and is most prominent on bespoke suits from English tailors, particularly those traditionally associated with riding clothes. The least formal are patch pockets, which are exactly what the name implies: pockets created by applying a patch to the outside of the jacket. Patch pockets are the most casual option; they are frequently found on summer suits that would otherwise appear overly formal, as well as on sports jackets.
Moving on from pockets we find the jacket’s vents, flap-like slits in the back bottom of the jacket which accommodate movement and offer easy access to the trouser pockets. There are three common styles: Ventless, Center, and Double. Ventless jackets, just as the name implies, have no vents, and are popular on Continental suits; they provide a very sleek look to the back of the jacket, though they can lead to wrinkling when the wearer sits down. This style works well for athletically built men, but larger men had best avoid it. Center-vented jackets, very popular on American suits, have a single slit at the back, allowing the jacket to expand at the bottom when sitting. Because of its placement, center-vented jackets have a habit of exposing the wearer’s posterior, though most seem not to mind. The popularity of the center vent is not in it’s functionality, but in that it is the least expensive vent to manufacture. The crown jewel of vents is the double or
side-vented jacket; it has two vents, one on either side, generally just behind the trouser pockets, to provide easy access and freedom of movement. Side vents facilitate sitting more easily, moving as needed to prevent the rumpling of the jacket back. Double vents do an excellent job of covering a man’s backside, especially when compared to the single vent.
Sleeve Buttons
There are numerous historical reasons for jacket sleeves bearing buttons, from encouraging the use of handkerchiefs to allowing a gentleman to wash his hands without removing his jacket (a traditionally grave social offense in mixed company). Whatever the reason for their arrival on jacket sleeves, sleeve buttons now form an important part of the detail work or trimming of the jacket. Most traditionally, jacket sleeves bear four buttons, though it is not uncommon to find three. Regardless of number, there should be at least as many of them as there are buttons on the waist, and they are always placed within a half-inch or so above the hem. On bespoke suits, and even some of the higher-quality made-to-measure jackets, the sleeve buttons are functional. When the buttons are functional, there is some temptation to leave one button undone in order to draw attention to the feature – and by extension, the quality of the custom made suits – though this is a matter of personal taste.
No comments:
Post a Comment